Do you know what is the repair method after the packing barrel is damaged? Let's follow the editor of Best High transparency elastomer on sales to have a simple understanding!
The external dust on the damaged part of the Packing barrel should be removed first, and the dust should be wiped off with a rag, and then new ballast should be scraped out with a knife. If there is oil, you can first use hot alkaline water to remove the oil, then wash off the lye with clean water, and then scrape the surface with a knife. When repairing cracks, you need to cut a piece that is slightly longer and wider than the crack, and there is no aging plastic sheet of the same type, and the appearance is treated. Then, in the place where the Packing barrel broke, all were glued in order, and a damp cloth was used to press to make the bonding tighter.

It has a beautiful appearance, smooth inside and outside, no welding seamless, light weight, good strength, impact resistance, non-toxic and tasteless, convenient transportation, and long service life. Product technical parameters must strictly implement standards, and product appearance design and product dimensions can also be tailored according to needs. Hot filling is available, and the general temperature should not exceed 60°C. You should wait for the contents to cool down and cool down to room temperature before closing the lid and stacking.
To sum up, the editor of Best High transparency elastomer on sales tells: About the repair method after the damage of Packing barrel, I hope you can learn more through the introduction of the editor.