How to open the Best Latex paint sealed barrel?1. Unzip the top to the case so you can get your grip. This will allow you to apply the paint.2. Take the bottle of latex and use it to remove the white residue from the cap. You will find that it will spread out as the latex cures but never completely dry.3. With a piece of string or other long string you can wrap around the cap and pull tight until the latex cures.4. Once the latex has cured and dried a little you will notice that the white residue has not dried.5. Put the string back through the latex to loosen it up without stretching the string! This will allow you to apply paint as a loose spray on with your latex.6. 

How to use Best Latex paint sealed barrel?1. Pour the liquid into a container. Then place the container in the refrigerator.2. Wait 3 days for the liquid to reduce.3. Add the wax sealer to the container, make sure the wax sealer is not in contact with the container, because it will start to get hard and the consistency will change.4. Seal the container thoroughly5.
What should I do if the Best Latex paint sealed barrel is dirty?If your Best Latex paint sealed barrel has soiled the surface that the paint has dried on your surface, take a small strip of clean-rubber and start rubbing it in with your finger to see if it helps smooth the area. If that doesn't work, you may put a little more of your Best Latex on a fresh area.If you use the Best Latex paint sealed barrel with clear-varnish for long periods, or that has been exposed to water and/or sweat, or that has been exposed to the elements, take the barrel out of the moisture area immediately. If you see any visible signs of water and/or sweat, rinse the barrel as needed. If needed, use your fingers to gently rub the paint seal into the surface.