Do you know the advantages of Elastomer material TPE? Let’s take a look at it with the editor of TPR elastomer!
1. General thermoplastic molding machine processing does not require other processing equipment.
2. The production efficiency is greatly increased. The rubber injection molding machine is used for direct vulcanization, and the time is shortened from about 20 minutes to less than 1 minute; because the required vulcanization time is very short, it can be directly vulcanized with an extruder, and the production efficiency is greatly improved.
3. Easy to recycle and reduce the required cost. The waste (escape burr, extruded waste rubber) and waste products generated in the production process can be directly recycled; the old Elastomer material TPE products can be recycled after simple regeneration, reducing environmental pollution and expanding the source of renewable resources.
4. Energy saving. Most thermoplastic elastomers do not require vulcanization or have a short vulcanization time, which can effectively save energy. Take the high-pressure hose production energy consumption as an example: rubber 188mj/kg, thermoplastic elastomer 144mj/kg, energy saving more than 25%.
5. Application areas. Since thermoplastic elastomers have the advantages of rubber and plastics, they have opened up a new application area for the rubber industry.
In summary, the editor of TPR elastomer tells: About the introduction of the advantages of Elastomer material TPE, I hope you can learn more through the introduction of the editor.